Sunday, February 5, 2012

Mobile Sawing & Routing Center Woodworking Plan

by Maniac on January 30, 2012

This project has always been near and dear to my heart for a long time.  Mostly because it does a couple of things really well.  The first is that it combines tools, which saves space and provide that anchor tool that everyone needs.  Second it shows you how to save some money on a big cabinet saw by using a smaller but powerful benchtop saw as the main part of the project.

Benchtop Saws

Craftsman and Bosch both make some really nice portable saws or bench top saws .  The key is to look at the horsepower that they offer and the fence system.  These are the main two selling points of any saw.  I prefer belt driven saws with a decent amount of horsepower.  You can easily build a system around a $300 or $300 dollar saw.  My favorite technique is to find a used on Craigslist.  This is a great way to save even more money and use something that someone has probably only used a few times and just wants to get rid of.  Once you have the saw you can begin to tweak this plan to design this tool that will work perfect for your shop.  If you plan on keeping it stationary, then you do not need wheels, but I do recommend them since you will find that moving it around the shop or cleaning under it is desirable.  I move my shop around a lot when I get the desire to “find” room for a new toy.

Router Table

Adding this onto the top is a huge help and its where I get most of my questions.  How do you do it?  Or does “this” saw fit an extension table.  The truth is, the plan helps you make an extension table but you can choose a router table extension that is already made to add to it as well.  I am a big fan of building my own, since you save even more money.  Look for the parts for the fence, supplemental fence and router inserts at your favorite woodworking store.  A lot of time the tablesaws you can buy already have a iron extension on them.  I would recommend taking them off and building a MDF extension for the router table.  If you really want to go nuts, build a router table lift into the design.  They cost about $300 more dollars but they are pretty awesome.

Storage

Here is what makes this plan awesome, the storage capacity.   Every station in the shop should have some storage associated with it.  You have to have places to put extra blades, the wrenches and the user manual and its best to have each tool have its own storage.  You can never get enough, never.   You can tweak or change anything to your needs.  This will transform the way you work in your shop.  If you are like me and a little messy, it will also help you be more organized.  I need all the help I can get.  You can also add some really innovative dust collection ideas to this center if you want to go the extra mile.

You can find this Router Table and Table Saw Combination here

 

{ 0 comments }

If you are a person who loves outdoor life, then you appreciate the ethereal beauty that a garden gives a compound. A garden has always been the main aspect of landscaping and landscapers have over the years come up with creative additions to make the garden even more elegant. One of the oldest features of the garden is the Gazebo, which is as old as the garden itself. This is a structure with a roof, open walls and a deck. This structure is built on a spot that gives the most magnificent view of the horizon and mostly blends with the landscape.

The origin of the gazebo is a mystery. However, historians and architects point to Egyptian civilization as the probable origin due to references in literature and also paintings in pharaohs’ tombs depicting the structure. The structures date back to 1400 BC according to the murals that have been discovered in Egypt. The term itself is even more mystifying with some claiming it is a play on the word “gaze” and a Latin addition “ebo” translating to “I shall see”. Etymologists quote a 1752 book on Chinese design by William Halfpenny as the first time the word was used. Early gazebos were also common in China and were conspicuous in the homes of the affluent families fro mediation purposes. The spread to Europe more so France during the renaissance in the 14th century was inevitable as architects played on existing designs. Later the designs spread to England and were dominant on Elizabethan gardens. In America, the fad reached its peak during the 18th century and even George Washington had an eight sided one during the time.

For a structure with such an elaborate history, dominance in outdoor design is obvious. Today’s designs come in many shapes and designs from octagonal sided to square ones. In addition, the materials vary from cedar, pine, wrought iron to the eco-friendly vinyl. The uses have also changed from just mediation to entertaining guests and holding functions such as weddings. If you are in need of a good gazebo, there is the option of ordering one from different companies and assembling it from your backyard. This will save you a lot of construction time and you can also select from myriad designs offered.

If you are handy, you can also construct your own from scratch as this will give you the freedom to design exactly what you have in mind. Here is a simple guide on how you can do this;
1) After marking the area where the gazebo is to stand, dig the 30 inch holes for the posts and place the pressure treated posts in the holes firmly using concrete mix.

2) Link the posts using cedar or pine planks with screws and keenly check the leveling.
If you want a deck, you can prepare it at this point.

3) If you have bought the walling kit, assemble it by fitting the tongue and groove boards using screws. If you don’t have the kit, prepare your own boards fro the walls considering a gazebo should have free flowing air.

4) Prepare the roofing by fitting the supporting planks. You can also use boards on the roof before placing the shingles or any other roofing you need.

Building your own summerhouse can be very tedious. Remember this is not just about functionality but also aesthetics. You might have a good garden but your pergola might ruin everything.

Read more articles about building outdoor structures and gazebos.

{ 0 comments }

Woodpecker's Coping Sled Giveaway on Router Table Depot

May 2, 2011

I found this contest on Router Table Depot’s site.  It really is offered on their facebook page but you can find a link to it on the site.  They are starting their summer tool givewaway  again which is always great.  They tend to give away good stuff instead of some tool or gadget that no [...]

Read the full article →

Woodpeckers Coping Sled, Giveaway on RTD

April 29, 2011

This is pretty cool.  Router Table Depot started their summer tool giveaway again and this month they are featuring the Woodpeckers Coping Sled.  You do not have to buy anything and it looks like all you have to do is go to their Router Table Depot Facebook page and like the ad to enter.  When [...]

Read the full article →

Why All router plates are not predrilled for every router

January 29, 2011

Did you ever notice that sometimes your router does not have a name brand router plate pre-drilled for it?  For example, no one pre-drills for a Hitachi router.  The reason is, the router is not that popular and most manufacturers have not found it a good use of their time to stop and change all [...]

Read the full article →

The Handy Goddess, a Woodworker (really)

January 5, 2011

Well I ran across this looking for something on You Tube and I more or less stopped in my tracks.  This lady actually knows how to make furniture and uses some natural assets to help her (and us) out.  I thought it was a little edgy but I have to admit I like her style [...]

Read the full article →

Black Friday Deals extended to Monday

November 27, 2010

I talked to the folks over at Router Table Depot and they are extending their black Friday deals until Monday 10 PM.  There a couple of smoking deals on tables and lots of bonus type bundles to choose from.  I really like the “buy this table and get  a router bit set free” one.  Last [...]

Read the full article →

The "Blue Tornado" is Coming

October 24, 2010

The other day I was looking around at all the woodworking sites.  Most of them have their own line of router bits which is a nice addition if you are buying a router table.  The only player in router tables that did not have a line is router table depot.  Not any more, they now [...]

Read the full article →

Porter Cable 895PK

October 16, 2010

Porter Cable 895PK Specifications Soft-starting, 12 Amp motor features full-time electronic feedback that maintains motor speed through the toughest applications Variable-speed control feature (10,000 – 23,000 rpm) enables bit speed to be optimized for changing applications Release the motor, adjust bit height and clamp the motor from above the router table with model #75301 kit [...]

Read the full article →

Custom Router Table on Table Saw

October 8, 2010

Another good idea and it looks like this rig is built for the long haul.  I love projects that others do that can spawn good ideas down the road.  This one is very practical and gives a lot of usefulness to shops that are short on space.

Read the full article →